A crooked Bobblehead can ruin the look of your display, but in many cases the fix is simple and does not require advanced tools. By carefully adjusting the spring, repositioning the head, or stabilizing the interior, you can straighten a Bobblehead and restore its wobble without damaging the figure.[1][2][3]

How To Fix A Crooked Bobblehead

Why Bobblehead Heads Become Crooked

Most modern Bobbleheads use a metal spring or similar connector between the head and body, and small problems with this spring often cause tilt or rotation issues. Shipping, heat, or minor manufacturing variance can all make a Bobblehead head lean to one side or point in the wrong direction.[2][4][5][1]

- A twisted or bent spring can pull the Bobblehead head to one side so it never sits straight when at rest.[6][1]

- Weak or broken glue around the spring attachment can let the Bobblehead head rotate or droop over time.[4][2]

- Deformed plastic or vinyl in the head shell can also lead to a permanent lean if not supported internally.[7][5]

Safety And Preparation Before Repairs

Before trying to fix a crooked Bobblehead, set up a safe, clean workspace and understand that aggressive force can break springs or neck posts. Working slowly and gently gives you the best chance of correcting the Bobblehead tilt without visible damage.[8][1][6]

- Place a soft cloth or towel on your table to protect paint and prevent the Bobblehead from slipping.[8][4]

- Wash and dry your hands so oils or dirt do not transfer onto the Bobblehead surface while you handle it.[8]

- If you plan to use glue or heat, read product instructions and follow basic safety guidance for adhesives and hot water.[4][8]

Quick Checks: Is The Bobblehead Actually Crooked?

Sometimes a Bobblehead only looks crooked from certain angles or because of sculpt design, so basic checks can prevent unnecessary repairs. Evaluating the figure from all sides helps decide whether you need to touch the spring or leave the Bobblehead alone.[5][1][6]

- Set the Bobblehead on a level surface and view it from front, sides, and above to confirm the head really leans or twists.[6]

- Compare with product photos if available; some Bobbleheads are designed to look sideways or tilted intentionally.[5]

- Gently nudge the head; if it settles back to the same crooked position every time, the Bobblehead spring or shell likely needs adjustment.[1][2]

Method 1: Gently Twisting The Spring

For minor tilt or rotation, many collectors fix a crooked Bobblehead simply by carefully twisting the spring instead of forcing the head. This method can realign the head without removing it or breaking factory glue if done slowly.[2][1][6]

- Reach inside the hollow head and find the end or “nub” of the spring where it sits on the neck post of the Bobblehead.[7][1]

- Use a fingertip or a small tool to push the spring end slightly while gently turning, which rotates the head toward center.[2][6]

- Stop as soon as the Bobblehead head looks straight; avoid overtwisting, which can stress the spring or glue joint.[1][2]

Method 2: Removing And Re seating The Spring

If the spring is badly bent or glued at a poor angle, you may need to remove it, straighten it, and reinstall it to fix the Bobblehead. This method requires more care but can dramatically improve how straight the Bobblehead head sits.[6][1][2][8]

- Work the spring back and forth until the glue seal cracks, then twist the spring off from the head or body attachment point.[1][2]

- Use needlenose pliers to find the bent coil and gently bend it back in the opposite direction until the Bobblehead spring appears straight.[1]

- Twist the spring back onto the neck peg first, then onto the head, making sure everything sits straight before the Bobblehead glue fully sets if you reglue.[4][8][1]

Bobblehead Repair Tutorial

Method 3: Straightening With Internal Support

Some fixes rely on adding material inside the hollow head so it rests straighter even if the spring itself remains slightly skewed. This approach can sacrifice some wobble but helps a displayfocused Bobblehead look better.[3][5]

- Insert bubble wrap, cotton balls, or similar lightweight filler inside the head on the lowertilt side to push the Bobblehead head back toward level.[3][5]

- Adjust the amount and placement of filler until the Bobblehead head appears straighter from the front.[3][5]

- Understand that more filler usually means less bobbling; this method prioritizes visual straightness over maximum Bobblehead movement.[5][3]

Method 4: Using Heat To Soften Vinyl Or Plastic

For vinyl Bobbleheads, gently warming the head can sometimes allow you to correct mild deformation around the neck hole. This method must be used carefully to avoid warping details or damaging paint on the Bobblehead.[9][10][11]

- Place the Bobblehead head (or entire figure, if necessary) in warm—not boiling—water for a short period to soften the vinyl.[10][9]

- Remove, quickly reposition the head while the material is pliable, and hold the Bobblehead in the desired alignment as it cools.[9][10]

- Do not expose the Bobblehead to excessive heat sources like direct flame or very hot tools, which can permanently deform or discolor it.[11][10]

Method 5: Repairing Broken Or Loose Glue Joints

If the head is both crooked and unusually loose, the adhesive that holds the spring or neck parts may have failed. Carefully regluing these joints can bring the Bobblehead back to a centered, functional state.[8][4]

- Clean any old loose glue or debris around the spring connection and neck area of the Bobblehead.[4][8]

- Apply a small amount of strong adhesive compatible with the Bobblehead material, then align the head straight while the glue sets.[8][4]

- Hold or support the Bobblehead in position until the adhesive cures, then test the wobble gently to ensure it remains centered.[4][8]

When To Leave A Crooked Bobblehead Alone

Not every crooked Bobblehead needs repair; some imperfections are minor and attempts to fix them carry risk. In collectible lines, many collectors accept small tilt differences rather than risking broken springs or cracked necks.[6][5][1]

- If the lean is small and does not affect display or stability, you may decide to leave the Bobblehead as is.[6]

- Limitededition or expensive Bobbleheads may be safer in “as received” condition rather than undergoing amateur repairs.[11][4]

- If you are unsure, consider practicing on a less valuable Bobblehead first to learn how springs and necks behave during adjustment.[5][6]

Preventing Future Bobblehead Crookedness

Once a Bobblehead has been fixed, better handling and storage habits can reduce the chance of new tilt problems. Protecting the head, spring, and neck area helps keep your Bobblehead collection looking straight and consistent over time.[11][8][4]

- Store Bobbleheads upright on stable shelves or in display cases where they are not squeezed or bent against each other.[8][4]

- Avoid extreme heat or direct sunlight, which can soften vinyl or plastic and encourage leaning in Bobbleheads.[11][8]

- Use padding or original packaging for transport, especially around the head and neck of each Bobblehead.[4][8]

Conclusion

A crooked Bobblehead does not have to stay crooked forever, and in many cases gentle, targeted adjustments are all that is needed to restore a straight, satisfying wobble. By understanding how springs, glue joints, and hollow heads work, and by choosing the least invasive fix first, you can protect the value of each Bobblehead while keeping your display neat and visually aligned.[1][6][8][4]

Fix Leaning Bobblehead

FAQ

1. Is it safe to twist the head of a crooked Bobblehead?

Light twisting is often safe if you support the neck and move slowly, but directly twisting the head can stress the spring or neck post. Many collectors recommend targeting the end of the spring inside the head instead, rotating it there to realign the Bobblehead.[2][3][6][1]

2. What if the spring breaks while fixing the Bobblehead?

If the spring breaks, you can sometimes replace it with a similar spring from another Bobblehead or a craft store, then reglue it in place. If no replacement is available, filling the head and fixing it in a static position is another option, though the Bobblehead will no longer wobble.[3][5][8][4]

3. Can I use hot water to fix a crooked Bobblehead?

Warm water can help soften vinyl or plastic so you can gently reshape a leaning head, especially on some Funkostyle Bobbleheads. However, water that is too hot or long exposure can warp details or damage paint, so moderate temperature and short soak times are important.[10][9][11]

4. How do I know when to stop adjusting the Bobblehead?

Stop as soon as the Bobblehead looks straight from normal viewing angles and the spring still feels secure. Repeated bending, twisting, or forcing beyond that point increases the risk of breaking joints or weakening the plastic around the spring.[2][6][1]

5. Should I try to fix a rare or expensive Bobblehead myself?

For highvalue or highly sentimental Bobbleheads, many collectors recommend either leaving minor tilt alone or consulting an experienced restorer. DIY methods work well for common Bobbleheads, but mistakes on rare pieces may permanently affect value and appearance.[11][8][4]

Citations:

[1](https://funkofunatic.com/viewtopic.php?t=58586)

[2](https://www.reddit.com/r/funkopop/comments/5qdui2/anyone_have_a_crooked_bobble_head_fix_i_tried/)

[3](https://www.youtube.com/watch?v=74L-B_oSaX0)

[4](https://fashiondoll001.wordpress.com/2014/01/02/how-to-fix-the-broken-bobblehead/)

[5](https://funkofunatic.com/viewtopic.php?t=49732)

[6](https://www.reddit.com/r/funkopop/comments/dv8nxb/please_help_me_i_tried_to_fix_a_bobble_heads/)

[7](https://www.youtube.com/watch?v=x8Jt8TQzOZo)

[8](https://www.youtube.com/watch?v=j7ne6DrKlko)

[9](https://www.tiktok.com/@blakesilva/video/7125176979300683054)

[10](https://www.facebook.com/groups/634332759991554/posts/24122239017440931/)

[11](https://www.facebook.com/groups/domgfanclub/posts/2861801190663098/)

[12](https://www.facebook.com/abbernaffycustoms/videos/%EF%B8%8F-how-to-fixing-wonky-headed-pops-%EF%B8%8Flittle-bit-of-pop-maintenance-for-you-guys-wh/735768210434373/)

[13](https://www.tiktok.com/@benymaximoff/video/7150996639455415553)

[14](https://www.tiktok.com/@poporazzy/video/7177831734950530347)

[15](https://www.tiktok.com/discover/how-to-fix-a-bobblehead-spring)